Unicode Standard Annex #9

The Bidirectional Algorithm

Version	Unicode 4.0.0
Authors	Mark Davis (mark.davis@us.ibm.com)
Date	2003-04-17
This Version	http://www.unicode.org/reports/tr9/tr9-11.html
Previous Version	http://www.unicode.org/reports/tr9/tr9-10.html
Latest Version	http://www.unicode.org/reports/tr9/
Tracking Number	11

Summary

This document describes specifications for the positioning of characters flowing from right to left, such as Arabic or Hebrew.

Status

This document has been reviewed by Unicode members and other interested parties, and has been approved by the Unicode Technical Committee as a Unicode Standard Annex. This is a stable document and may be used as reference material or cited as a normative reference by other specifications.

A Unicode Standard Annex (UAX) forms an integral part of the Unicode Standard, but is published as a separate document. The Unicode Standard may require conformance to normative content in a Unicode Standard Annex, if so specified in the Conformance chapter of that version of the Unicode Standard. The version number of a UAX document corresponds to the version number of the Unicode Standard at the last point that the UAX document was updated.

Please submit corrigenda and other comments with the online reporting form [Feedback]. Related information that is useful in understanding this document is found in References. For the latest version of the Unicode Standard see [Unicode]. For a list of current Unicode Technical Reports see [Reports]. For more information about versions of the Unicode Standard, see [Versions].

Contents

1. Introduction

2. Directional Formatting Codes

2.1. Explicit Directional Embedding

2.2. Explicit Directional Overrides

2.3. Terminating Explicit Directional Code

2.4. Implicit Directional Marks

3. Basic Display Algorithm

3.1. Definitions: BD1, BD2, BD3, BD4 BD5, BD6, BD7

3.2. Bidirectional Character Types

3.3 Resolving Embedding Levels

3.3.1. The Paragraph Level: P1, P2, P3

3.3.2. Explicit Levels and Directions: X1, X2, X3, X4, X5, X6, X7, X8, X9, X10

3.3.3. Resolving Weak Types: W1, W2, W3, W4, W5, W6, W7

3.3.4. Resolving Neutral Types: N1, N2

3.3.5. Resolving Implicit Levels: I1, I2

3.4. Reordering Resolved Levels: L1, L2, L3, L4

3.5 Shaping

4. Bidirectional Conformance

4.1. Boundary Neutrals

4.2. Explicit Formatting_Codes

4.3. Higher-Level Protocols

5. Implementation Notes

5.1. Reference Code

5.2. Retaining Format Codes

5.3. Joiners

5.4. Vertical Text

5.5. Usage

6. Mirroring

Acknowledgements

References

Modifications

---

1. Introduction

The Unicode Standard prescribes a memory representation order known as logical order. When text is presented in horizontal lines, most scripts display characters from left to right. However, there are several scripts (such as Arabic or Hebrew) where the natural ordering of horizontal text in display is from right to left. If all of the text has the same horizontal direction, then the ordering of the display text is unambiguous. However, when bidirectional text (a mixture of left-to-right and right-to-left horizontal text) is present, some ambiguities can arise in determining the ordering of the displayed characters.

This section describes the algorithm used to determine the directionality for bidirectional Unicode text. The algorithm extends the implicit model currently employed by a number of existing implementations and adds explicit format codes for special circumstances. In most cases, there is no need to include additional information with the text to obtain correct display ordering.

However, in the case of bidirectional text, there are circumstances where an implicit bidirectional ordering is not sufficient to produce comprehensible text. To deal with these cases, a minimal set of directional formatting codes is defined to control the ordering of characters when rendered. This allows exact control of the display ordering for legible interchange and also ensures that plain text used for simple items like filenames or labels can always be correctly ordered for display.

The directional formatting codes are used only to influence the display ordering of text. In all other respects they should be ignored--they have no effect on the comparison of text, nor on word breaks, parsing, or numeric analysis.

When working with bidirectional text, the characters are still interpreted in logical order--only the display is affected. The display ordering of bidirectional text depends upon the directional properties of the characters in the text.

2. Directional Formatting Codes

Two types of explicit codes are used to modify the standard implicit Unicode bidirectional algorithm. In addition, there are implicit ordering codes, the right-to-left and left-to-right marks. All of these codes are limited to the current paragraph; thus their effects are terminated by a paragraph separator. The directional types left-to-right and right-to-left are called strong types, and characters of those types are called strong directional characters. The directional types associated with numbers are called weak types, and characters of those types are called weak directional characters.

Although the term embedding is used for some explicit codes, the text within the scope of the codes is not independent of the surrounding text. Characters within an embedding can affect the ordering of characters outside, and vice versa. The algorithm is designed so that the use of explicit codes can be equivalently represented by out-of-line information, such as stylesheet information. However, any alternative representation will be defined by reference to the behavior of the explicit codes in this algorithm.

2.1 Explicit Directional Embedding

The following codes signal that a piece of text is to be treated as embedded. For example, an English quotation in the middle of an Arabic sentence could be marked as being embedded left-to-right text. If there were a Hebrew phrase in the middle of the English quotation, then that phrase could be marked as being embedded right-to-left. These codes allow for nested embeddings.

RLE	Right-to-Left Embedding	Treat the following text as embedded right-to-left.
LRE	Left-to-Right Embedding	Treat the following text as embedded left-to-right.

The precise meaning of these codes will be made clear in the discussion of the algorithm. The effect of right-left line direction, for example, can be accomplished by simply embedding the text with RLE...PDF.

2.2 Explicit Directional Overrides

The following codes allow the bidirectional character types to be overridden when required for special cases, such as for part numbers. These codes allow for nested directional overrides.

RLO	Right-to-Left Override	Force following characters to be treated as strong right-to-left characters.
LRO	Left-to-Right Override	Force following characters to be treated as strong left-to-right characters.

The precise meaning of these codes will be made clear in the discussion of the algorithm. The right-to-left override, for example, can be used to force a part number made of mixed English, digits and Hebrew letters to be written from right to left.

2.3 Terminating Explicit Directional Code

The following code terminates the effects of the last explicit code (either embedding or override) and restores the bidirectional state to what it was before that code was encountered.

PDF	Pop Directional Format	Restore the bidirectional state to what it was before the last LRE, RLE, RLO, LRO.

2.4 Implicit Directional Marks

These characters are very light-weight codes. They act exactly like right-to-left or left-to-right characters, except that they do not display or have any other semantic effect. Their use is generally more convenient than the explicit embeddings or overrides since their scope is much more local.

RLM	Right-to-Left Mark	Right-to-left zero-width character
LRM	Left-to-Right Mark	Left-to-right zero-width character

There is no special mention of the implicit directional marks in the following algorithm. That is because their effect on bidirectional ordering is exactly the same as a corresponding strong directional character; the only difference is that they do not appear in the display.

3. Basic Display Algorithm

The Bidirectional Algorithm takes a stream of text as input, and proceeds in three main phases:

• Separation of the input text into paragraphs. The rest of the algorithm affects only the text between paragraph separators.
• Resolution of the embedding levels of the text. In this phase, the directional character types, plus the explicit format codes, are used to produce resolved embedding levels.
• Reordering the text for display on a line-by-line basis using the resolved embedding levels, once the text has been broken into lines.

The algorithm only reorders text within a paragraph; characters in one paragraph have no effect on characters in a different paragraph. Paragraphs are divided by the Paragraph Separator or appropriate Newline Function (for guidelines on the handling of CR, LF, and CRLF, see Section 4.4, Directionality and Section 5.8, Newline Guidelines). Paragraphs may also be determined by higher-level protocols: for example, the text in two different cells of a table will be in different paragraphs.

Combining characters always attach to the preceding base character in the memory representation. Even after reordering for display and performing character shaping, the glyph representing a combining character will attach to the glyph representing its base character in memory. Depending on the line orientation and the placement direction of base letterform glyphs, it may, for example, attach to the glyph on the left, or on the right, or above.

In the following text, the normative definitions and rules are distinguished by the following numbering:

3.1 Definitions

BD1. The bidirectional characters types are values assigned to each Unicode character, including unassigned characters.

BD2. Embedding levels are numbers that indicate how deeply the text is nested, and the default direction of text on that level. The minimum embedding level of text is zero, and the maximum explicit depth is level 61.

Embedding levels are explicitly set by both override format codes and by embedding format codes; higher numbers mean the text is more deeply nested. The reason for having a limitation is to provide a precise stack limit for implementations to guarantee the same results. Sixty-one levels is far more than sufficient for ordering, even with mechanically generated formatting; the display becomes rather muddied with more than a small number of embeddings.

BD3. The default direction of the current embedding level (for a character in question) is called the embedding direction. It is L if the embedding level is even, and R if the embedding level is odd.

For example, in a particular piece of text, Level 0 is plain English text, Level 1 is plain Arabic text, possibly embedded within English level 0 text. Level 2 is English text, possibly embedded within Arabic level 1 text, and so on. Unless their direction is overridden, English text and numbers will always be an even level; Arabic text (excluding numbers) will always be an odd level. The exact meaning of the embedding level will become clear when the reordering algorithm is discussed, but the following provides an example of how the algorithm works.

BD4. The paragraph embedding level is the embedding level that determines the default bidirectional orientation of the text in that paragraph.

BD5. The direction of the paragraph embedding level is called the paragraph direction.

• In some contexts the paragraph direction is also known as the base direction.

BD6. The directional override status determines whether the bidirectional type of characters is to be reset with explicit directional controls. This status has three states:

BD7. A level run is a maximal substring of characters that have the same embedding level. It is maximal in that no character immediately before or after the substring has the same level.

Example

In the following examples, case is used to indicate different implicit character types for those unfamiliar with right-to-left letters. Uppercase letters stand for right-to-left characters (such as Arabic or Hebrew), while lowercase letters stand for left-to-right characters (such as English or Russian).

Memory:            car is THE CAR in arabic

Character types:   LLL-LL-RRR-RRR-LL-LLLLLL

Resolved levels:   000000011111110000000000

Notice that the neutral character (space) between THE and CAR gets the level of the surrounding characters. This is how the implicit directional marks have an effect. By inserting appropriate directional marks around neutral characters, the level of the neutral characters can be changed.

3.2 Bidirectional Character Types

The normative bidirectional character types for each character are specified in the Unicode Character Database [UCD] and are summarized in Table 3-7.

• The term European digits is used to refer to decimal forms common in Europe and elsewhere, and Arabic-Indic digits to refer to the native Arabic forms. (See Section 8.2, Arabic, for more details on naming digits.)
• Unassigned characters are given strong types in the algorithm. This is an explicit exception to the general Unicode conformance requirements with respect to unassigned characters. As characters become assigned in the future, these bidirectional types may change. For assignments to character types see the [UCD].
• Private use characters can be assigned different values by a conformant implementation.
• For the purpose of the bidirectional algorithm, inline objects (such as graphics) are treated as if they are an OBJECT REPLACEMENT CHARACTER (U+FFFC).

• As of Unicode 4.0, the Bidirectional Character Types of a few Indic characters were altered so that the Bidirectional Algorithm preserves canonical equivalence. That is, two canonically equivalent strings will result in equivalent ordering after applying the algorithm. This invariant will be maintained in the future.

  Note, however, that the Bidirectional Algorithm does not preserve compatibility equivalence.

Table 3-8 lists additional abbreviations used in the examples and internal character types used in the algorithm.

3.3 Resolving Embedding Levels

The body of the bidirectional algorithm uses character types and explicit codes to produce a list of resolved levels. This resolution process consists of five steps: (1) determining the paragraph level; (2) determining explicit embedding levels and directions; (3) resolving weak types; (4) resolving neutral types; and (5) resolving implicit embedding levels.

3.3.1. The Paragraph Level

P1. Split the text into separate paragraphs. A paragraph separator is kept with the previous paragraph. Within each paragraph, apply all the other rules of this algorithm.

P2. In each paragraph, find the first character of type L, AL, or R.

Because paragraph separators delimit text in this algorithm, this will generally be the first strong character after a paragraph separator or at the very beginning of the text. Note that the characters of type LRE, LRO, RLE, RLO are ignored in this rule. This is because typically they are used to indicate that the embedded text is the opposite direction than the paragraph level.

P3. If a character is found in P2 and it is of type AL or R, then set the paragraph embedding level to one; otherwise, set it to zero.

Note that when a higher-level protocol specifies the paragraph level, it is not necessary to apply rules P2 and P3.

3.3.2. Explicit Levels and Directions

All explicit embedding levels are determined from the embedding and override codes, by applying the explicit level rules X1 through X9. These rules are applied as part of the same logical pass over the input.

Explicit Embeddings

X1. Begin by setting the current embedding level to the paragraph embedding level. Set the directional override status to neutral. Process each character iteratively, applying rules X2 through X9. Only embedding levels from 0 to 61 are valid in this phase.

In the resolution of levels in rules I1 and I2, the maximum embedding level of 62 can be reached.

X2. With each RLE, compute the least greater odd embedding level.

a. If this new level would be valid, then this embedding code is valid. Remember (push) the current embedding level and override status. Reset the current level to this new level, and reset the override status to neutral.

b. If the new level would not be valid, then this code is invalid. Don't change the current level or override status.

For example, level 0 => 1; levels 1, 2 => 3; levels 3, 4 => 5; ...59,60 => 61; above 60, no change (don’t change levels with RLE if the new level would be invalid).

X3. With each LRE, compute the least greater even embedding level.

a. If this new level would be valid, then this embedding code is valid. Remember (push) the current embedding level and override status. Reset the current level to this new level, and reset the override status to neutral.

b. If the new level would not be valid, then this code is invalid. Don't change the current level or override status.

For example, levels 0, 1 => 2; levels 2, 3 => 4; levels 4, 5 => 6; ...58, 59 => 60; above 59, no change (don’t change levels with LRE if the new level would be invalid).

Explicit Overrides

An explicit directional override sets the embedding level in the same way the explicit embedding codes do, but also changes the directional character type of affected characters to the override direction.

X4. With each RLO, compute the least greater odd embedding level.

a. If this new level would be valid, then this embedding code is valid. Remember (push) the current embedding level and override status. Reset the current level to this new level, and reset the override status to right-to-left.

b. If the new level would not be valid, then this code is invalid. Don't change the current level or override status.

X5. With each LRO, compute the least greater even embedding level.

a. If this new level would be valid, then this embedding code is valid. Remember (push) the current embedding level and override status. Reset the current level to this new level, and reset the override status to left-to-right.

b. If the new level would not be valid, then this code is invalid. Don't change the current level or override status.

X6. For all types besides RLE, LRE, RLO, LRO, and PDF:

a. Set the level of the current character to the current embedding level.

b.  Whenever the directional override status is not neutral, reset the current character type to the directional override status.

If the directional override status is neutral, then characters retain their normal types: Arabic characters stay AL, Latin characters stay L, neutrals stay N, and so on. If the directional override status is R, then characters become R. If the directional override status is L, then characters become L.

Terminating Embeddings and Overrides

There is a single code to terminate the scope of the current explicit code, whether an embedding or a directional override. All codes and pushed states are completely popped at the end of paragraphs.

X7. With each PDF, determine the matching embedding or override code. If there was a valid matching code, restore (pop) the last remembered (pushed) embedding level and directional override.

X8. All explicit directional embeddings and overrides are completely terminated at the end of each paragraph. Paragraph separators are not included in the embedding.

X9. Remove all RLE, LRE, RLO, LRO, PDF, and BN codes.

• Note that an implementation does not have to actually remove the codes, it just has to behave as though the codes were not present for the remainder of the algorithm. Conformance does not require any particular placement of these codes as long as all other characters are ordered correctly.

  See 5. Implementation Notes for information on implementing the algorithm without removing the formatting codes.

• The Zero Width Joiner and Non Joiner affect the shaping of the adjacent characters; those that are adjacent in the original backing-store order, even though those characters may end up being rearranged to be non-adjacent by the BIDI algorithm. For more information, see Joiners.

X10. The remaining rules are applied to each run of characters at the same level. For each run, determine the start-of-level-run (sor) and end-of-level-run (eor) type, either L or R. This depends on the higher of the two levels on either side of the boundary (at the start or end of the paragraph, the level of the 'other' run is the base embedding level). If the higher level is odd, the type is R, otherwise it is L.

For example:

Levels:  0   0   0   1   1   1   2

Runs:   <--- 1 ---> <--- 2 ---> <3>

Run 1 is at level 0, sor is L, eor is R.
Run 2 is at level 1, sor is R, eor is L.
Run 3 is at level 2, sor is L, eor is L.

For two adjacent runs, the eor of the first run is the same as the sor of the second.

3.3.3. Resolving Weak Types

Weak types are now resolved one level run at a time. At level run boundaries where the type of the character on the other side of the boundary is required, the type assigned to sor or eor is used.

Non-spacing marks are now resolved based on the previous characters.

W1. Examine each non-spacing mark (NSM) in the level run, and change the type of the NSM to the type of the previous character. If the NSM is at the start of the level run, it will get the type of sor.

Assume in this example that sor is R:

AL  NSM NSM => AL  AL  AL

sor NSM     => sor R

The text is next parsed for numbers. This pass will change the directional types European Number Separator, European Number Terminator, and Common Number Separator to be European Number text, Arabic Number text, or Other Neutral text. The text to be scanned may have already had its type altered by directional overrides. If so, then it will not parse as numeric.

W2. Search backwards from each instance of a European number until the first strong type (R, L, AL, or sor) is found.  If an AL is found, change the type of the European number to Arabic number.

AL EN    => AL AN

AL N EN  => AL N AN

sor N EN => sor N EN

L N EN   => L N EN

R N EN   => R N EN

W3. Change all ALs to R.

W4. A single European separator between two European numbers changes to a European number. A single common separator between two numbers of the same type changes to that type:

EN ES EN => EN EN EN

EN CS EN => EN EN EN

AN CS AN => AN AN AN

W5. A sequence of European terminators adjacent to European numbers changes to all European numbers:

ET ET EN => EN EN EN

EN ET ET => EN EN EN

AN ET EN => AN EN EN

W6. Otherwise, separators and terminators change to Other Neutral:

AN ET    => AN ON

L  ES EN => L  ON EN

EN CS AN => EN ON AN

ET AN    => ON AN

W7. Search backwards from each instance of a European number until the first strong type (R, L, or sor) is found. If an L is found,  then change the type of the European number to L.

L  N EN => L  N  L

R  N EN => R  N  EN

3.3.5. Resolving Neutral Types

Neutral types are now resolved one level run at a time. At level run boundaries where the type of the character on the other side of the boundary is required, the type assigned to sor or eor is used.

The next phase resolves the direction of the neutrals. The results of this phase are that all neutrals become either R or L. Generally, neutrals take on the direction of the surrounding text. In case of a conflict, they take on the embedding direction.

N1. A sequence of neutrals takes the direction of the surrounding strong text if the text on both sides has the same direction. European and Arabic numbers are treated as though they were R. Start-of-level-run (sor) and end-of-level-run (eor) are used at level run boundaries.

R  N  R  => R  R  R

L  N  L  => L  L  L

R  N  AN => R  R  AN

AN N  R  => AN R  R

R  N  EN => R  R  EN

EN N  R  => EN R  R

N2. Any remaining neutrals take the embedding direction.

N => e

Assume in this example that eor is L, and sor is R:

L   N eor => L   L eor

R   N eor => R   e eor

sor N L   => sor e L

sor N R   => sor R R

Examples. A list of numbers separated by neutrals and embedded in a directional run will come out in the run’s order.

Storage:	he said "THE VALUES ARE 123, 456, 789, OK".

Display:	he said "KO ,789 ,456 ,123 ERA SEULAV EHT".

In this case, both the comma and the space between the numbers take on the direction of the surrounding text (uppercase = right-to-left), ignoring the numbers. The commas are not considered part of the number since they are not surrounded on both sides (see number parsing). However, if there is an adjacent left-to-right sequence, then European numbers will adopt that direction:

Storage:	he said "IT IS A bmw 500, OK."

Display:	he said ".KO ,bmw 500 A SI TI"

3.3.5 Resolving Implicit Levels

In the final phase, the embedding level of text may be increased, based upon the resolved character type. Right-to-left text will always end up with an odd level, and left-to-right and numeric text will always end up with an even level. In addition, numeric text will always end up with a higher level than the paragraph level. (Note that it is possible for text to end up at levels higher than 61 as a result of this process.) This results in the following rules:

I1. For all characters with an even (left-to-right) embedding direction, those of type R go up one level and those of type AN or EN go up two levels.

I2. For all characters with an odd (right-to-left) embedding direction, those of type L, EN or AN go up one level.

Table 3-10 summarizes the results of the implicit algorithm.

3.4 Reordering Resolved Levels

The following algorithm describes the logical process of finding the correct display order. As described before, this logical process is not necessarily the actual implementation, which may diverge for efficiency as long as it produces the same results. As opposed to resolution phases, this algorithm acts on a per-line basis, and is applied after any line wrapping is applied to the paragraph.

The process of breaking a paragraph into one or more lines that fit within particular bounds is outside the scope of the bidirectional algorithm. Where character shaping is involved, it can be somewhat more complicated (see Section 8.2 Arabic). Logically there are the following steps:

• The levels of the text are determined according to the bidirectional algorithm.
• The characters are shaped into glyphs according to their context (taking the embedding levels into account for mirroring!).
• The accumulated widths of those glyphs (in logical order) are used to determine line breaks.
• For each line, rules L1-L4 are used to reorder the characters on that line.
• The glyphs corresponding to the characters on the line are displayed in that order.

L1. On each line, reset the embedding level of the following characters to the paragraph embedding level:

1. segment separators,
2. paragraph separators,
3. any sequence of whitespace characters preceding a segment separator or paragraph separator, and
4. any sequence of white space characters at the end of the line.

• The types of characters used here are the original types, not those modified by the previous phase.
• Since a Paragraph Separator breaks lines, there will be at most one per line, at the end of that line.

In combination with the following rule, this means that trailing white space will appear at the visual end of the line (in the paragraph direction). Tabulation will always have a consistent direction within a paragraph.

L2. From the highest level found in the text to the lowest odd level on each line, including intermediate levels not actually present in the text, reverse any contiguous sequence of characters that are at that level or higher.

This reverses a progressively larger series of substrings. The following four examples illustrate this. In these examples, the paragraph embedding level for the first and third examples is assumed to be 0 (left to right direction), and for the second and fourth is assumed to be 1 (right to left direction).

Example 1 (embedding level = 0)

Memory:              car means CAR.

Resolved levels:     00000000001110

Reverse level 1:     car means RAC.

Example 2 (embedding level = 1)

Memory:              car MEANS CAR.

Resolved levels:     22211111111111

Reverse level 2:     rac MEANS CAR.

Reverse levels 1-2:  .RAC SNAEM car

Example 3 (embedding level = 0)

Memory:              he said "car MEANS CAR."

Resolved levels:     000000000222111111111100

Reverse level 2:     he said "rac MEANS CAR."

Reverse levels 1-2:  he said "RAC SNAEM car."

Example 4 (embedding level = 1)

Memory:              DID YOU SAY ‘he said "car MEANS CAR"’?

Resolved levels:     11111111111112222222224443333333333211

Reverse level 4:     DID YOU SAY ‘he said "rac MEANS CAR"’?

Reverse levels 3-4:  DID YOU SAY ‘he said "RAC SNAEM car"’?

Reverse levels 2-4:  DID YOU SAY ‘"rac MEANS CAR" dias eh’?

Reverse levels 1-4:  ?‘he said "RAC SNAEM car"’ YAS UOY DID

L3. Combining marks applied to a right-to-left base character will at this point precede their base character. If the rendering engine expects them to follow the base characters in the final display process, then the ordering of the marks and the base character must be reversed.

Many font designers provide default metrics for combining marks that support rendering by simple overhang. Because of the reordering for right-to-left characters, it is common practice to make the glyphs for most combining characters overhang to the left (thus assuming the characters will be applied to left-to-right base characters) and make the glyphs for combining characters in right-to-left scripts overhang to the right (thus assuming that the characters will be applied to right-to-left base characters). With such fonts, the display ordering of the marks and base glyphs may need to be adjusted when combining marks are applied to "unmatching" base characters. See Section 5.14, Rendering Non-Spacing Marks for more information.

L4. A character that possesses the mirrored property as specified by Section 4.7, Mirrored, must be depicted by a mirrored glyph if the resolved directionality of that character is R.

For example, U+0028 left parenthesis—which is interpreted in the Unicode Standard as an opening parenthesis—appears as "(" when its resolved level is even, and as the mirrored glyph ")" when its resolved level is odd.

3.5 Shaping

Shaping is logically applied after the bidirectional algorithm is used, and limited to characters within the same directional run. For example, suppose that we have the following string of Arabic characters in memory as characters 1, 2, 3, and 4, and where the first two characters are overridden to be LTR. To show both paragraph directions, the next two are embedded, but with the normal RTL direction.

1	2	3	4
ج 062C JEEM	ع 0639 AIN	ل 0644 LAM	م 0645 MEEM
L	L	R	R

One can use embedding codes to get this effect in plain text, or use markup in HTML, as in the examples below. (The red text would be for the right-to-left paragraph direction.)

• LRM/RLM LRO JEEM AIN PDF RLO LAM MEEM PDF

• <p dir="ltr"/"rtl">LRO JEEM AIN PDF RLO LAM MEEM PDF</p>

• <p dir="ltr"/"rtl"><bdo dir="ltr">JEEM AIN</bdo><bdo dir="rtl">LAM MEEM</bdo></p>

The resulting shapes will be the following, according to the paragraph direction:

4. Bidirectional Conformance

The bidirectional algorithm specifies part of the intrinsic semantics of right-to-left characters. In the absence of a higher-level protocol that specifically supersedes the interpretation of directionality, systems that interpret these characters must achieve results identical to the implicit bidirectional algorithm when rendering.

4.1. Boundary Neutrals

The goal in marking a format or control character as BN is that it have no effect on the rest of the algorithm. (ZWJ and ZWNJ are exceptions; see X9). Since the precise ordering of format characters with respect to others is not required for conformance, implementations are free to handle them in different ways for efficiency as long as the ordering of the other characters is preserved.

4.2. Explicit Formatting Codes

As with any Unicode characters, systems do not have to support any particular explicit directional formatting code (although it is not generally useful to include a terminating code without including the initiator). Generally, conforming systems will fall into three classes:

• No bidirectional formatting. This implies that the system does not visually interpret characters from right-to-left scripts.
• Implicit bidirectionality. The implicit bidirectional algorithm and the directional marks RLM and LRM are supported.
• Full bidirectionality. The implicit bidirectional algorithm, the implicit directional marks, and the explicit directional embedding codes are supported: RLM, LRM, LRE, RLE, LRO, RLO, PDF.

4.3. Higher-Level Protocols

The following are permissible ways for systems to apply higher-level protocols to the ordering of bidirectional text.

• Override the paragraph embedding level.
  A higher-level protocol should provide for overriding the paragraph embedding level, such as on a table cell, paragraph, document, or system level.
• Override the number handling to use information provided by a broader context.
  For example, information from other paragraphs in a document could be used to conclude that the document was fundamentally Arabic, and that EN should generally be converted to AN.
• Replace, supplement, or override the directional overrides or embedding codes.
  This is done by providing information via additional stylesheet or markup information about the embedding level or character direction. The interpretation of such information must always be defined by reference to the behavior of the equivalent explicit codes as defined in the algorithm.
• Remap the number shapes to match those of another set.
  For example, remap the Arabic number shapes to have the same appearance as the European numbers.

When text using a higher-level protocol is to be converted to Unicode plain text, formatting codes should be inserted to ensure that the order matches that of the higher-level protocol, or (as in the last example) the appropriate characters can be substituted.

5. Implementation Notes

5.1. Reference Code

There are two versions of BIDI reference code available. Both have been tested to produce identical results. One version is written in Java, while the other is written in C++. The Java version is designed to closely follow the steps of the algorithm as described below. The C++ code is designed to show one of the optimization methods that can be applied to the algorithm, using a state table for one phase.

Note: one of the most effective optimizations is to first test for right-to-left characters, and not invoke the BIDI algorithm unless they are present.

The code is in the directories BidiReferenceJava and BidiReferenceCpp. Implementers are encouraged to use this resource to test their implementations.

5.2. Retaining Format Codes

Some implementations may wish to retain the format codes when running the algorithm. The following provides a summary of how this may be done. Note that this summary is an informative implementation guideline; it should provide the same results as the explicit algorithm above, but in case of any deviation the explicit algorithm is the normative statement for conformance.

• In rule X9, instead of removing the format codes, assign the embedding level to each embedding character, and turn it into BN.
• In rule X10, assign L or R to the last of a sequence of adjacent BNs according to the eor / sor, and set the level to the higher of the two levels.
• In rule W1, search backwards from each NSM to the first character in the level run whose type is not BN, and set the NSM to its type. If the NSM is the first non-BN character, it will get the type of sor.
• In rule W4, scan past BN types that are adjacent to ES or CS.
• In rule W5, change all appropriate sequences of ET and BN, not just ET.
• In rule W6, change all BN types adjacent to ET, ES, CS to ON as well.
• In rule W7 scan past BN
• In rules N1 and N2 treat BNs adjoining neutrals same as those neutrals
• In rules I1 and I2 ignore BN
• In rule L1, include format codes and BN together with whitespace characters in the sequences whose level gets reset before a separator or line break. Resolve any LRE, RLE, LRO, RLO, PDF or BN to the level of the preceding character if there is one, otherwise to the base level.

Implementations that display visible representations of format characters will want to adjust this process in order to position the format characters optimally for editing.

5.3. Joiners

As described under X9, the Zero Width Joiner and Non Joiner affect the shaping of the adjacent characters—those that are adjacent in the original backing-store order—even though those characters may end up being rearranged to be non-adjacent by the BIDI algorithm. In order to determine the joining behavior of a particular character after applying the BIDI algorithm, there are two main strategies.

• When shaping, an implementation can refer back to the original backing store to see if there were adjacent ZWNJ or ZWJ characters.

• Alternatively, the implementation can replace ZWJ and ZWNJ by an out-of-band character property associated with those adjacent characters, so that the information does not interfere with the BIDI algorithm and the information is preserved across rearrangement of those characters. Once the BIDI algorithm has been applied, that out-of-band information can then be used for proper shaping.

5.4. Vertical Text

In the case of vertical line orientation, the bidirectional algorithm is still used to determine the levels of the text. However, these levels are not used to reorder the text, since the characters are usually ordered uniformly from top to bottom. Instead, the levels are used to determine the rotation of the text. Sometimes vertical lines follow a vertical baseline in which each character is oriented as normal (with no rotation), with characters ordered from top to bottom whether they are Hebrew, numbers, or Latin. When setting text using the Arabic script in vertical lines, it is more common to employ a horizontal baseline that is rotated by 90° counterclockwise so that the characters are ordered from top to bottom. Latin text and numbers may be rotated 90° clockwise so that the characters are also ordered from top to bottom.

The bidirectional algorithm also comes into effect when some characters are ordered from bottom to top. For example, this happens with a mixture of Arabic and Latin glyphs when all the glyphs are rotated uniformly 90° clockwise. (The choice of whether text is to be presented horizontally or vertically, or whether text is to be rotated, is not specified by the Unicode Standard, and is left up to higher-level protocols.)

5.5. Usage

Because of the implicit character types and the heuristics for resolving neutral and numeric directional behavior, the implicit bidirectional ordering will generally produce the correct display without any further work. However, problematic cases may occur when a right-to-left paragraph begins with left-to-right characters, or there are nested segments of different-direction text, or there are weak characters on directional boundaries. In these cases, embeddings or directional marks may be required to get the right display. Part numbers may also require directional overrides.

The most common problematic case is that of neutrals on the boundary of an embedded language. This can be addressed by setting the level of the embedded text correctly. For example, with all the text at level 0 the following occurs:

Memory:  he said "I NEED WATER!", and expired.

Display: he said "RETAW DEEN I!", and expired.

If the exclamation mark is to be part of the Arabic quotation, then the user can select the text I NEED WATER! and explicitly mark it as embedded Arabic, which produces the following result:

Memory:  he said "<RLE>I NEED WATER!<PDF>", and expired.

Display: he said "!RETAW DEEN I", and expired.

A simpler method of doing this is to place a right directional mark (RLM) after the exclamation mark. Since the exclamation mark is now not on a directional boundary, this produces the correct result.

Memory:  he said "I NEED WATER!<RLM>", and expired.

Display: he said "!RETAW DEEN I", and expired.

This latter approach is preferred since it does not make use of the stateful format codes, which can easily get out of sync if not fully supported by editors and other string manipulation. The stateful format codes are generally only needed for more complex (and rare) cases such as double embeddings, as in the following:

Memory:  DID YOU SAY ‘<LRE>he said "I NEED WATER!<RLM>", and expired.<PDF>’?

Display: ?‘he said "!RETAW DEEN I", and expired.’ YAS UOY DID

Migrating from 2.0 to 3.0

In the Unicode 3.0 Character Database, new bidirectional character types were introduced to make the body of the algorithm depend only on the types of characters, and not on the character values. The changes from the 2.0 bidirectional types are listed in Table 3-9:

Implementations that use older property tables can adjust to the modifications in the bidirectional algorithm by algorithmically remapping the above characters to the new types.

7. Mirroring

The mirrored property is important to ensure that the correct character codes are used for the desired semantic. This is of particular importance where the name of a character does not indicate the intended semantic, such as with U+0028 "(" LEFT PARENTHESIS. While the name indicates that it is a left parenthesis, the character really expresses an open parenthesis — the leading character in a parenthetical phrase, not the trailing one.

Note that in some contexts, some of the characters that have the mirrored property are sometimes not rendered with mirrored glyphs. A higher level protocol can limit mirroring action (rule L4) to a subset of those with the mirroring property. See also Higher-Level Protocols in Section 3.12 Bidirectional Behavior. Except in such cases, mirroring must be done by an application of rule L4, to ensure that the correct character code is used to express the intended semantic of the character.

Implementing rule L4 calls for mirrored glyphs. These glyphs may not be exact graphical mirror images. For example, clearly an italic parenthesis is not an exact mirror image of another: "(" vs ")". Instead, mirror glyphs are those acceptable as mirrors within the normal parameters of the font in which they are represented.

In implementation, sometimes pairs of characters are acceptable mirrors for one another: for example, U+0028 "(" LEFT PARENTHESIS and U+0029 ")" RIGHT PARENTHESIS or U+22E0 "⋠" DOES NOT PRECEDE OR EQUAL and U+22E1 "⋡" DOES NOT SUCCEED OR EQUAL. Other characters such as U+2231 "∱" CLOCKWISE INTEGRAL do not have corresponding characters that can be used for acceptable mirrors. The informative Bidi Mirroring data file [Data], lists the paired characters with acceptable mirror glyphs. A comment in the file indicates where the pairs are "best fit": they should be acceptable in rendering, although ideally the mirrored glyphs may have somewhat different shapes.

Acknowledgements

Thanks to the following people for their contributions to the Bidirectional Algorithm or for their feedback on earlier versions of this document: Alaa Ghoneim (علاء غنيم), Ahmed Talaat (أحمد طلعت), Asmus Freytag, Avery Bishop, Behdad Esfahbod (بهداد اسفهبد), Doug Felt, Eric Mader, Gidi Shalom-Bendor (גידי שלום-בן דור), Isai Scheinberg, Israel Gidali (ישראל גידלי), Joe Becker, John McConnell, Jonathan Kew, Jonathan Rosenne (יונתן רוזן), Khaled Sherif (خالد شريف), Kamal Mansour (كمال منصور), Kenneth Whistler, Maha Hassan (مها حسن), Markus Scherer, Martin Dürst, Mati Allouche (מתתיהו  אלוש), Michel Suignard, Mike Ksar, Murray Sargent, Paul Nelson, Rick McGowan, Roozbeh Pournader (روزبه پورنادر), Steve Atkin, and Thomas Milo (تُومَاسْ مِيلُو).

References

[Data]	Bidi Mirroring The latest data file is: http://www.unicode.org/Public/UNIDATA/BidiMirroring.txt. The data file at the time of publication is: http://www.unicode.org/Public/4.0-Update/BidiMirroring-4.0.0.txt.
[Feedback]	Reporting Errors and Requesting Information Online http://www.unicode.org/reporting.html
Reports]	Unicode Technical Reports http://www.unicode.org/reports/ For information on the status and development process for technical reports, and for a list of technical reports.
[UCD]	Unicode Character Database. http://www.unicode.org/ucd For an overview of the Unicode Character Database and a list of its associated files
[Unicode]	The Unicode Consortium. The Unicode Standard, Version 4.0. Reading, MA, Addison-Wesley, 2003. 0-321-18578-1.
[Versions]	Versions of the Unicode Standard http://www.unicode.org/standard/versions For information on version numbering, and citing and referencing the Unicode Standard, the Unicode Character Database, and Unicode Technical Reports.

Modifications

The following summarizes modifications from the previous version of this document.

11	Updated for Unicode 4.0. Added note on canonical equivalence Added Joiners section on ZWJ and ZWNJ Clarified L2 and examples following. Added a section on the interaction of shaping and bidirectional reordering. Moved lists for unassigned characters into UCD.html (also now explicit in DerivedBidiClass.txt) Updated references for Newline Guidelines (since the UAX is incorporated into the 4.0 book) The first two sections were rearranged, with Reference Code going into Implementation Notes, and Mirroring in its own section at the end. This is not highlighted in the proposed text. Sections were renumbered and the table of contents is more detailed. This is not highlighted in the proposed text. Misc editing.
10	Updated for Unicode 3.2. Updated UAX boilerplate in the status section.
9	Clarified the language of P2 Corrected the implementation note on "Retaining Format Codes" in Implementation Notes Minor editing

---

Copyright © 2000-2003 Unicode, Inc. All Rights Reserved. The Unicode Consortium makes no expressed or implied warranty of any kind, and assumes no liability for errors or omissions. No liability is assumed for incidental and consequential damages in connection with or arising out of the use of the information or programs contained or accompanying this technical report. The Unicode Terms of Use apply.

Unicode and the Unicode logo are trademarks of Unicode, Inc., and are registered in some jurisdictions.